Drills and Drill Bits
Grainger Threading Tool 1/2 Carbide
The Micro 100 1/2" Shank Threading Tool is a high speed steel threading tool with a 1/2" shank diameter and 1/4" minimum hole size. It has a 60 degree threading angle and can cut unified coarse, unified fine, and metric threads. The overall length is 5" and it has a TiN coating for increased tool life. This threading tool is made in the USA by Micro 100 and can be used on lathes, screw machines, and CNC machines. The tool comes with a 30 day money back guarantee if not completely satisfied with performance.
Grainger Ball End Mill Single End 2.00mm Carbide
The Ball End Mill from Ball is a high-speed steel end mill with a ball nose end. It has a 1/2" shank diameter, a 2" overall length, and a 1/2" cutting diameter. The end mill has 2 flutes and a right-hand spiral. It is designed for general purpose milling in materials like aluminum, brass, bronze, and plastics. The end mill features TiAlN coating for increased tool life and heat resistance. It can be run at speeds up to 11,000 RPM. The end mill is made in the USA.
Grainger Sq. End Mill Single End Carb 21/64
The 14M457 is a 3M Scotch-Brite General Purpose Hand Pad, 6" x 9", Very Fine grade. It features an open web construction and is made of nylon and synthetic fibers with aluminum oxide abrasives. This hand pad can be used for light scrubbing and finishing on metal, plastic, glass and other surfaces. It effectively removes rust, oxidation and light burrs without scratching. The very fine grade makes it suitable for applications requiring a smooth, uniform finish. The hand pad measures 6 inches by 9 inches and has hooked ends for easy gripping. It can be used by hand or with a handle. This is a popular, versatile hand pad from a leading brand.
Grainger Cor Rad End Mill 1/8 Carb 0.0200 rad
The Micro 100 Corner Radius End Mill is a carbide end mill with a corner radius of 0.031 inches. It has a 1/4 inch shank diameter and is available in multiple lengths from 1/2 inch to 2 inches. The end mill has 4 flutes and can be run at speeds up to 12,000 RPM. It is designed for general purpose milling in steels, stainless steels, cast iron, aluminum and other non-ferrous materials. The corner radius design allows for stronger cutting edges and smoother wall transitions.
Grainger Ball End Mill Single End 1.50mm Carbide
The Grainger 14K369 is a 3/4 HP, 115V, 1725 RPM, 56C Frame, Open Drip Proof, Single Phase, Ball Bearing, Electric Motor. It has a NEMA standard 56C frame with a 1.15 service factor. The motor is totally enclosed, fan cooled (TEFC) with a cast iron frame and end bells. It has Class F insulation and is inverter duty rated. The motor dimensions are 9-1/4" long x 7-3/16" wide x 8-7/16" high with a 1" diameter shaft. It weighs approximately 36 lbs and operates on single phase 115V power. The motor is designed for direct drive applications such as pumps, fans, and conveyors.
Grainger End Mill Kyocera MECX 20S20074T 20m
The Kyocera 170HP3 is a 1/2" diameter, 4 flute, high performance cobalt end mill with a 1-1/2" overall length. It has a TiAIN coating and can machine a variety of materials including hardened steels up to 65HRC, high temp alloys, titanium alloys, nickel based alloys, and stainless steels. The end mill features variable helix flutes to reduce harmonics and provide excellent chip control. Recommended cutting parameters are 12,000-18,000 RPM with feed rates from 0.004-0.012 IPR depending on material being machined.
Grainger Sq. End Mill Single End Carb 0.0240
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has a 1/2" shank diameter, 1" overall length, and a 1/2" cutting diameter. The end mill has 4 flutes and a right-hand spiral. It is designed for use on steel, cast iron, aluminum, and other non-ferrous metals at speeds up to 2000 SFM. The end mill is made in the USA by Grainger Approved and comes with a 30-day money back guarantee.
Grainger Threading Tool 3/16 Carbide
The Micro 100 Threading Tool is a high speed steel threading tool with a 3/16 inch shank diameter. It has a 60 degree threading point and can cut unified coarse, unified fine, and 8 pitch threads. The overall length is 3 inches and it has an American National Standard stub length of 2 inches. This durable tool is made in the USA and well-suited for production threading applications. The 3/16 inch shank allows it to be held securely in tool holders. It can thread a variety of materials including steel, cast iron, aluminum, brass, bronze and plastics.
Grainger Threading Tool 3/16 Carbide
The 16T303 Threading Tool is a 3/16" carbide threading tool made by West Indigo. It has a 60 degree threading point and is designed for cutting threads in steel, stainless steel, cast iron, aluminum, and other metals. The tool has an overall length of 5-1/2" and features a 5/8" shank that fits standard tool holders. It can cut unified coarse, unified fine, and metric threads with pitches ranging from 24 to 80 threads per inch. The carbide cutter provides wear resistance and durability. This threading tool allows efficient internal and external threading operations on lathes and screw machines.
Grainger Sq. End Mill Single End Carb 8.00mm
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has a 1/2" shank diameter, 1-1/2" overall length, and a 1/2" cutting diameter. The end mill has 4 flutes and a right-hand spiral. It is uncoated and made in the USA. The end mill can be used on steel, stainless steel, cast iron, aluminum, copper, brass, bronze, plastic, and fiberglass at speeds up to 2000 SFM.